nec's UPC2791TB and upc2792tb are silicon mmic wideband amplifiers manufactured using nec's 10 ghz f t nesat tm ii silicon bipolar process. these devices are de- signed for use as second if buffer amps in dbs tuners. the upc2791/92tb are pin compatible and their performance is comparable to the larger upc1675/76g, so they are suitable for use as a replacement to help reduce system size. these ic's are housed in a 6 pin super minimold or sot-363 pack- age. nec's stringent quality assurance and test procedure ensure the highest reliability and performance. description UPC2791TB, upc2792tb 5 v, super minimold silicon mmic wideband amplifier features ? high density surface mounting: 6 pin super minimold or sot- 363 package supply voltage: v cc = 4.5 to 5.5 v wideband response: UPC2791TB: fu = 1.9 ghz typ upc2792tb: fu = 1.2 ghz typ power gain: UPC2791TB: g p = 12 db typ upc2792tb: g p = 20 db typ preliminary data sheet gain vs. frequency frequency, f (ghz) gain, gp (db) typical performance curves 20 15 10 5 0 0.5 1.0 1.5 2.0 upc2792tb UPC2791TB part number UPC2791TB upc2792tb package outline s06 s06 symbols parameters and conditions units min typ max min typ max i cc circuit current (no signal) ma 12 17 22 14 19 24 g p power gain, f = 500 mhz db 10 12 14 17 20 22 f u upper limit operating frequency (the gain at f u is 3 db down from the gain at 100 mhz) ghz 1.6 1.9 1.0 1.2 p o (sat) maximum output level, f = 500 mhz, p in = 0 dbm dbm +2 +4 +3 +5 nf noise figure, f = 500 mhz db 5.5 7.0 3.5 6 rl in input return loss, f = 500 mhz db 9 12 12 15 rl out output return loss, f = 500 mhz db 8 11 9 12 isol isolation, f = 500 mhz db 20 24 24 28 electrical characteristics (t a = +25 c, v cc = 5.0 v, z l = z s = 50 ? ) date published: june 28, 2005 the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version.
pin pin applied no. name voltage description internal equivalent circuit (v) 1 gnd 0 ground pin. this pin should be connected 2 to system ground with minimum inductance. 5 ground pattern on the board should be formed as wide as possible. all the ground pins must be connected together with wide ground pattern to minimize impedance difference. 3 output signal output pin. an internal matching circuit, configured with resistors, enables 50 ? connection over a wide bandwidth. this pin must be coupled to the output load with a blocking capacitor. 4v cc 4.5 to 5.5 power supply pin. this pin should be externally equipped with a bypass capacitor to minimize ground impedance. 6 input signal input pin. an internal matching circuit, configured with resistors, enables 50 ? connection over a wide bandwidth. a multi-feedback circuit is designed to cancel the deviations of h fe and resistance. this pin must be coupled to the signal source with a blocking capacitor. absolute maximum ratings 1 (t a = 25 c) symbols parameters units ratings v cc supply voltage v 6 p in input power dbm +10 p t total power dissipation 2 mw 200 t op operating temperature c -40 to +85 t stg storage temperature c -55 to +150 recommended operating conditions symbol parameter units min typ max v cc supply voltage v 4.5 5.0 5.5 t op operating temperature ?c -40 +25 +85 notes: 1. operation in excess of any one of these parameters may result in permanent damage. 2. mounted on double sided copper clad 50 x 50 x 1.6 mm epoxy glass pwb (t a = +85 c). pin description UPC2791TB upc2792tb v cc out gnd2 gnd1 in v cc out gnd2 gnd1 in UPC2791TB, upc2792tb
UPC2791TB, upc2792tb outline dimensions (units in mm) package outline s06 pin connections in out v cc 1000 pf 1000 pf 1000 pf 1, 2, 5 50 ? c 1 6 4 3 c 2 c 3 50 ? test circuit part number marking qty UPC2791TB-e3 c2s 3k/reel upc2792tb-e3 c2t 3k/reel ordering information (solder contains lead) note: embossed tape, 8 mm wide. pins 1, 2, and 3 face perforated side of tape. (top view) (bottom view) 1. gnd 2. gnd 3. output marking is an example of UPC2791TB 4. v cc 5. gnd 6. input +0.1 -0 dot on back side +0.1 -0.5 0 ~0.1 0.2 0.15 3 2 1 6 5 4 0.65 1.3 2.0 0.2 0.65 2.1 0.1 1.25 0.1 0.9 0.1 0.7 c2s 2 1 4 5 6 2 1 4 5 6 33 c2c part number marking qty UPC2791TB-e3-a c2s 3k/reel upc2792tb-e3-a c2t 3k/reel ordering information (pb-free) note: embossed tape, 8 mm wide. pins 1, 2, and 3 face perforated side of tape. life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury. the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec compound semiconductor devices, ltd.
4590 patrick henry drive santa clara, ca 95054-1817 telephone: (408) 919-2500 facsimile: ( 408 ) 988-0279 subject: compliance with eu directives cel certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of european union (eu) directive 2002/95/ec restriction on use of hazardous substances in electrical and electronic equipment (rohs) and the requirements of eu directive 2003/11/ec restriction on penta and octa bde. cel pb-free products have the same base part number with a suffix added. the suffix ? indicates that the device is pb-free. the ?z suffix is used to designate devices containing pb which are exempted from the requirement of rohs directive (*). in all cases the devices have pb-free terminals. all devices with these suffixes meet the requirements of the rohs directive. this status is based on cel? understanding of the eu directives and knowledge of the materials that go into its products as of the date of disclosure of this information. restricted substance per rohs concentration limit per rohs (values are not yet fixed) concentration contained in cel devices -a -az lead (pb) < 1000 ppm not detected (*) mercury < 1000 ppm not detected cadmium < 100 ppm not detected hexavalent chromium < 1000 ppm not detected pbb < 1000 ppm not detected pbde < 1000 ppm not detected if you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. important information and disclaimer: information provided by cel on its website or in other communications concerting the substan ce content of its products represents knowledge and belief as of the date that it is provided. cel bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. efforts are underway t o better integrate information from third parties. cel has taken and continues to take reasonable steps to provide representative and ac curate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. cel and ce l suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall cel? liability arising out of such information exceed the total purchase price of the cel part(s) at issue s old by cel to customer on an annual basis. see cel terms and conditions for additional clarification of warranties and liability.
|
